FCJ factory OPGW Typical Designs of Central AL-covered Stainless Steel Tube

group name: OPGW

Min Order: 1 kilometer

brand name: FCJ Fiber Optic Products Manufacturer

model: OPGW Cable

Nearest port for product export: shanghai, Ningbo, Shenzhen, Guangzhou

Delivery clauses under the trade mode: FOB, CIF, EXW, Express Delivery

Acceptable payment methods: T/T, L/C, Credit Card, PayPal, Westem Union

update time: Thu, 21 Nov 2024 19:54:09 GMT

contact supplier

Paramtents

Fiber Type G652, G655
Customized Acceptable
Application Aerial, Overhead, Outdoor
Typical Design Central AL-covered Stainless Steel Tube

Packging & Delivery

Min Order1 kilometer

Briefing

OPGW Typical Designs Cable use to reconstruction of old power lines and low voltage level lines.

Detailed

Description

Optical Ground Wire (opgw cable) Mainly used for power communication with accessories,relay protection,automatic transmission,installation together with high-voltage lines. The central AL-covered steel tube is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires.AL-covered Stainless Steel Tube design increases the cross section of AL,to reach a better fault current and lightning resistance performance.Apply to the transmission line which requires small diameter and large fault current.

Technical Parameter

Specification	Fiber Count	Diameter(mm)	Weight (kg/km)	RTS(KN)	Short Circuit(KA2s)
OPGW-80(82.3;46.8)	24	11.9	504	82.3	46.8
OPGW-70(54.0;8.4)	24	11	432	70.1	33.9
OPGW-80(84.6;46.7)	48	12.1	514	84.6	46.7

Specification	Fiber Count	Diameter(mm)	Weight (kg/km)	RTS(KN)	Short Circuit(KA2s)
OPGW-143(87.9;176.9)	36	15.9	617	87.9	176.9

Standard

ITU-TG.652	Characteristics of a single mode optical fiber.
ITU-TG.655	Characteristics of a non-zero dispersion -shifted single mode fibers optical.
EIA/TIA598 B	Col code of fiber optic cables.
IEC 60794-4-10	Aerial optical cables along electrical power lines-family specification for OPGW.
IEC 60794-1-2	Optical fiber cables -part test procedures.
IEEE1138-2009	IEEE Standard for testing and performance for optical ground wire for use on electric utility power lines.
IEC 61232	Aluminum -Clad steel wire for electrical purposes.
IEC60104	Aluminum magnesium silicon alloy wire for overhead line conductors.
IEC 6108	Round wire concentric lay overhead electrical stranded conductors.